Tineco Carpet One Spot is a smart spot cleaner which automatically detects how dirty the carpet/upholstery is and applies the appropriate amount of solution, water,and roller speed to ensure the perfect cleaning effect every time. Especially in Spot Mode, Carpet One Spot is able to run automatically and stop immediately when it is clean, hands free for better user experience. No more repetitive bending and scrubbing!
In Spot and Auto mode, the appliance sprays water automatically and adjusts water spray volume based on how dirty the stain is; In Suction mode, it doesn't spray water.
The Carpet One Spot can be used on carpets, upholstery, car interior and stairs, such as fiber/cotton/flax/and etc. But it can't be used on hard floors, sparsely wooven upholstery, luxury carpets. If you are not sure about whether your carpet is suitable for machine cleaning, we suggest that you try it in a small and marginal area of your carpet or upholstery first, and applied for bigger areas afterwards.
Some Loop Berber carpets, Natural Fiber (including silk and wool), and Soft Fiber carpets can fuzz with wear. Some vacuums & carpet cleaners can worsen this carpet wear. If cleaning on Berber, Natural Fiber, or Soft Fiber carpeting, first test a small hidden area of carpet by running the carpet washer over it. If no fuzzing or overwetting occurs, continue cleaning. Avoid overwetting Berber carpets. If you have any questions or concerns, consult with your carpet manufacturer on deep cleaning recommendations.
Please check manufacturer’s tag before cleaning area rugs for any specialized cleaning instructions. We do not recommend deep cleaning delicate, silk, wool, antique or area rugs without a manufacturer’s tag. Important! Do not use on rugs or carpet when dry cleaning is recommended.
For upholstery, check cleaning code - Use your Cleaner only if the upholstery fabric is marked with a “W” (for “wet” clean) or “S/W” (for “solvent/dry” or “wet” clean). Do not clean fabric marked “S” (“solvent/dry” clean only). If your upholstery does not have a code, seek professional assistance.
It is not recommended to use a third party cleaning solution because the Spot Cleaner is designed to be used with the Tineco Cleaning Solution to optimize the amount of bubbles that are produced with cleaning solutions. Third party solutions can cause an over abundance of bubbles when cleaning that could fill up the Dirty Water Tank within minutes of use.
Carpet One Spot Essentials is 75dB(A).
The advanced version, Carpet One Spot is rather quiet, which has a voice of 70dB(A).
To start the self-cleaning mode, please follow the following steps: Before starting self-cleaning, please clean the DWT and ensure the water level in the CWT exceeds 20%. Then plug the adaptor into the main body, and press the button on the handle to start the self-cleaning cycle. The appliance will automatically shut off once finished. The entire self-cleaning process takes about 80 seconds.
We recommend cleaning the brushroll after each use.
Suction power for CARPET ONE SPOT Essentials is 22AW (Air Watts), and for CARPET ONE SPOT is 30AW (Air Watts) .
The Carpet One Spot Essentials has a Lithium-ion 22.2V 2500mAh battery that allows it to run 25 minutes.
The Carpet One Spot has a Lithium-ion 21.6V 4000mAh battery that allows it to run 40 minutes depending on how often the appliance is running on max power.
The Carpet One Spot Essentials takes around 5 hours to charge to full.
The Carpet One Spot takes around 5.5 hours to charge to full.
It uses 100-240V in its charger. We do not recommend using a different charger as that may not be compatible with the battery.
The Clean Water Tank capacity is 1.6L. The Dirty Water Tank capacity is 0.8L.
Using the cap of the solution bottle, fill 2 caps worth of solution and pour into the Clean Water Tank. Fill up the Clean Water Tank with clean water up to the Max line.
The temperature can be between 39.2°F ~ 104°F （4°C ~ 40°C). Typically normal tap water is fine to use for cleaning. Please do not use hot water as this can cause internal damage to the pipes in the appliance.
We recommend storing the appliance on the charging base that is provided with this appliance. For long term storage, we recommend storing the appliance indoors in a dry place after use.
It will automatically adjust the solution and clean water flow to make sure you have the ideal cleaning experience. You can turn the water flow off by switching it to Suction mode.
It ranges from 260 to 360ml/min in Carpet mode, 140 to 240 ml/min in Upholstery mode
The mode switch button allows users to select Spot/Auto/Suction modes, Spot Mode: perfect for tough messes, automatically stops as stains are removed, hands-free for better experience. Auto Mode: intelligently adjusts water flow for easy and effective cleaning. Suction Mode: only absorbs water to reduce drying time.
No, the cleaning solution does not have an odor, but it can deodorize the area you are cleaning.
Normally this does not happen because the brush roller diameter size is big enough so it can avoid getting tangled. If there is a tangle, just remove the brush roller from its holder and the hair tangle can be removed from the brush roller easily.
We do not recommend using this appliance to suck up animal hair, this appliance targets multiple types of debris and wet messes on the carpet and upholstery including everyday dirt (mud, grime), pet messes (urine, vomit, ordos), colored stains (juice, coffee, ketchup, jam), oil stains and etc.
There is no need to use distilled water. Tap water is perfectly fine to use in the appliance. Please do not use hot water as this can cause internal damage to the pipes in the appliance.
We would not recommend using bleach in this machine as it could damage the machine.
The warranty lasts 2 years.
The Carpet One Spot Essentials can work for 25 minutes in Auto mode. The battery running time may vary depending on the environment the appliance is being used on.
The Carpet One Spot can work for 40 minutes in Auto mode. The battery running time may vary depending on the environment the appliance is being used on.
For Carpet One Spot Essentials, plug in the adaptorto the socket, and plug the other side to charging hole on the appliance, then it will start charging and stop automatically once finished.
For Carpet One Spot, put the machine back to the tray and plug in the charger then it will start charging and stop automatically once finished.
The filter can be washed and cleaned. Please be sure to thoroughly dry the filter before placing it back in the appliance.
You may find the Dirty Water Tank Full indicator light blinking. A voice prompt can remind you to clean the DWT, or check for any blockages in the air channel. The appliance automatically stops operating once the DWT is full.
You may find the CWT empty indicator light blinking and a voice prompt reminding you to refill it.
You may find the brush roller blockage indicator light blinking and a voice prompt reminding you to take out the roller to clean it. Please check the air channel if there are any blockages while the roller is out of the brush roll holder.
You may find that the dirty indicator light is blinking and you need to clean the air channel opening located underneath the DWT when it is removed.
No, The Carpet One Spot is designed to pick up multiple types of debris and wet messes on the carpet and upholstery including everyday dirt (mud, grime), pet messes (urine, vomit, ordos), colored stains (juice, coffee, ketchup, jam), oil stains and etc.
The Carpet One Spot is designed to be used with carpet/upholstery surfaces. It should not be used on hard floors
The main difference is between the motor, battery, WiFi and the charging approach, which leads to differnt working noise and different battery life. The Carpet One Spot has WiFi, and it can be connected to Tineco Life App. And having a charging base makes it quiet convenient to charge and store the appliance.