Can you use a third party cleaning solution?
It is not recommended to use a third party cleaning solution because the floor washer is designed to be used with the Tineco Cleaning Solution to optimize the amount of bubbles that are produced with cleaning solutions. Third party solutions can cause an over abundance of bubbles when cleaning that could fill up the Dirty Water Tank within minutes of use.
Can you adjust the flow of liquid coming out?
|Floor One will automatically adjust solution and clean water flow to make sure have the idea cleaning performance.
How much does the product weigh?
The product weights about 9.5 lbs.
How do I know when the dirty indicator light is mulfunctioning?
You may find that the dirty indicator light is blinking and you need to clean the air channel opening located underneath the DWT when it is removed.
How to use self-cleaning mode?
|Always keep plug in. Place unit on storage tray. Dump the dirt water tahnk and the clean water tank should be at least 1/3 full of water. Press self-cleaning button to start the brush roll self-cleaning mode. The appliance will automatically shut off once finished. The entire self-cleaning process takes about 40 seconds.
How noisy is the floor washer?
The floor washer produces up to 78dBA of sound.
|It ranges from 50 to 220ml/min according to dirt level.
How long is the warranty?
The warranty lasts 2 years.
What is the difference between the FLOOR ONE S3 and the Ifloor 3?
Floor One S3 is a smart floor washer equipped with smart functions, APP connectivity, and voice prompts. The Ifloor 3 has the same base functions as the Floor One S3 but without smart features.
How often I need to clean the brush roller?
|We advise to clean the brushroll after each cleaning.
What is the suction power of the floor washer when sucking up water and debris?
Suction power for the floor washer ranges from 15-30AW (Air Watts) depending on how dirty the floor is.
What are the max button functions?
|It helps to remove tough spots and stains with higher speed and stronger spray.
How long does the battery last for?
The Floor One S3 can work for 35 minutes under Auto mode. The battery time may vary depending on the environment the Floor One S3 is being used on.
How much does the Floor One weigh?
The main body of Floor One weighs 10lbs/ 4.6kg.
What is the suction power when suck water and debris?
|Suction power is range from 15-30Aw depending on the dirty level.
How long can the floor washer run on a full charge?
The Floor One has a Lithium-ion 21.6V 4000mAh battery that allows it to run 25-35 minutes depending on how often the floor washer is running on max power.
Does the cleaning solution has odor?
|No but it can move odor and fresh your floor.
What are the functions included in APP?
Our APP includes the status of the Floor One such as power level, dirtiness level, battery level. The APP can also show you a performance report of your cleaning. Customer Service is able to be contacted through the APP.
Does it pick up large debris like cereals, dog food, etc?
The Floor One is designed to pick up debris like cereal and wash the floor simultaneously on hard floor surfaces.
How long it can work for full charged?
|25-35mins(Lithium-ion 21.6V 4000mAh)
How much time does the Floor One take to be fully charged?
The Floor One takes around 4 hours to charge to full.
How does this unit do dog hair?
|The unique brush roll can help to move dog hair and suck back to the dirt water tank.
Does the brush scratch surfaces or dull floors?
No, it doesn't. The brush works great on hard floors causing no damage to it. It is also recommended to test an area of a sensitive surface before using any accessories on it.
Can I use the Floor One to clean carpet?
The Floor One is designed to be used with hard floor surfaces. The Floor One should not be used on carpets.
How long it needs to be full charged?
|Normally it needs about 4 hours.
What are the Clean Water Tank and Dirty Water Tank capacities?
The Clean Water Tank capacity is 0.6L. The Dirty Water Tank capacity is 0.5L.
Does dog hair get wrapped around roller?
|Normally not because the roller diameter size is big enough so it can avoid such occasion.
What is the difference between Floor One S3 and other Brand wash cleaner?
|Tineco Floor One S3 is the first smart floor washer which automatically detects how dirty/gritty the floor is and applies the appropriate amount of detergent, roller pressure and suction power to ensuere the perfect hard floor clean every time.
Is it ok to leave the unit plugged into the charger after it is fully charged?
Yes, you can leave the Floor One plugged in as the Floor One will stop charging once fully charged.
What is the input of the charger? Can we use other brand charger with same input?
|100~240V, We suggest to use Tineco charger.
Does the water have to be at a specific temperature for cleaning?
The temperature can be between 41°F ~ 140°F （5°C ~ 60°C). Typically normal tap water is fine to use for cleaning. Please do not use hot water as this can cause internal damage to the pipes in the Floor One.
Do you have to use distilled water?
|No need, just tap water is fine and also avoid to use hot water.
Do you have to vacuum first before using the S3?
|No need. S3 can vacuum big debris during working.
How do I charge the battery pack?
Put the machine back to the tray and plug in the charger then it will start charging and stop automatically once finished.
What is the CWT and DWT capactiy?
|Clean Water Tank is 0.6L, Dirt Water Tank is 0.5L.
Can you adjust the flow of water coming out?
The Floor One will automatically adjust the solution and clean water flow to make sure you have the ideal cleaning experience. You can adjust the water flow to maximum by entering MAX mode when cleaning. This will set the flow to maximum for when you have a tough cleaning situation.
Can use bleach for floors in machine?
|We would not recommend using bleach in this machine as it could damage the cleaner.
What kind of floor it can be used?
|Non-carpeted floor such as vinyl, tile, sealed wood floor.
What is the difference between Floor One and other floor wash cleaners?
Tineco Floor One is the first smart floor washer which automatically detects how dirty the floor is and applies the appropriate amount of detergent, water, roller pressure and suction power to ensure the perfect hard floor clean every time.
What is the solution ratio for cleaning?
|1:50, you can use the solution cap, one cap of solution for full tank of water.
Does this unit suck up animal hair?
The unique brush roll can help to remove animal hair and suck it into the Dirty Water Tank.
Weight of product/ carton box?
Can this be used for dry vacuuming? Can u just vaccum without using water?
|This appliance will automatically adjust solution and clean water flow to make sure have the idea cleaning performance.
What kind of floors it can be used on?
The Floor One can be used on non-carpeted floor such as vinyl, tile, and sealed wood floors.
What is the suitable water temperature for cleaning?
|41°F~140°F （5℃~60℃. Notice not use hot water to avoid internal pipe damage.
Does animal hair get wrapped around roller?
Normally this does not happen because the brush roller diameter size is big enough so it can avoid getting tangled. If there is a tangle, just remove the brush roller from its holder and use the cleaning tool to remove the hair tangle from the brush roller.
How long does the battery last for?
|Floor One S3 can work 35 minutes under normal mode or auto mode, it may varies depending on using environment.
How do I know when the Clean Water Tank (CWT) needs to be refilled?
You may find the CWT empty indicator light blinking and a voice prompt reminding you to refill it.
Can you use your own solution?
|No. Tineco provides special matched solution.
Can this be used for dry vacuuming? Can you just vacuum without using water?
The Floor one can be used without water for dry vacuuming. Ideally you would want to use the Floor One with solution and water to automatically adjust solution and clean water flow to ensure an ideal cleaning result.
How to store Floor One S3?
|We suggest to put the appliance on the storage tray.
Can use bleach in the machine to clean floors?
We would not recommend using bleach in this machine as it could damage the machine.
How do I know when the brush roller is blocked?
You may find the brush roller blockage indicator light blinking and a voice prompt reminding you to take out the roller to clean it. Please check the air channel if there are any blockages while the roller is out of the brush roll holder.
How noisy is the machine?