The Floor One is designed to pick up debris like cereal and wash the floor simultaneously on hard floor surfaces. |
No. |
No. |
It is not recommended to use the suction mode for the ground with suction liquid . |
Yes, you can leave the Floor One plugged in as the Floor One will stop charging once fully charged. |
No. |
No, it doesn't. The brush works great on hard floors causing any damage to it. It is also recommended to test an area of a sensitive surface before using any accessories on it. |
The water and suction reach the maximum value in the strong mode, and the high-grade mode can be directly switched to cleaning when there are stubborn stains on the surface that are difficult to clean . |
Put the machine back to the tray and plug in the charger then it will start charging and stop automatically once finished. |
Our APP includes the status of the Floor One such as power level, dirtiness level, battery level. The APP can also show you a performance report of your cleaning. Customer Service is able to be contacted through the APP. |
LED screen displays the current product status through ICONS, such as bucket cleaning detection, sewage bucket detection, battery pack power detection, while LCD screen displays more product status through dynamic video, and can teach users to use and maintain products more clearly and intuitively through LCD dynamic screen. |
The filter can be washed and cleaned. Please be sure to thoroughly dry the filter before placing it back in the Floor One. Extra filters are also available on the Tineco website. |
S5 and S5 Pro difference is mainly the difference between the screen, S5 is LED screen, S5PRO is LCD screen, S5 mode is smart mode, Max mode, self-cleaning mode, and S5 Pro mode has smart mode, Max mode, self-cleaning mode and water absorption mode |
You may find the air channel blocked indicator light blinking. A voice prompt can remind you to dump the DWT, or check for any blockages in the air channel. The Floor One automatically stops operating once the DWT is full. |
Of course, in this S5 series of products, we pay attention to optimize the structure of the brush, which can clean some corners in the family environment. |
You may find the CWT empty indicator light blinking and a voice prompt reminding you to refill it. |
Of course, our product can easily clean pet residual dirt. Our product is also equipped with standard solution, which can easily eliminate the smell of pet residual dirt. |
You may find the brush roller blockage indicator light blinking and a voice prompt reminding you to take out the roller to clean it. Please check the air channel if there are any blockages while the roller is out of the brush roll holder. |
The default startup mode is smart mode. In this mode, press the "Mode Switch" button to switch to the other three modes. You can switch to another mode as required. |
You may find that the dirty indicator light is blinking and you need to clean the air channel opening located underneath the DWT when it is removed. |
Yes, S5 Pro long press wifi connection button for 10S, voice broadcast, long press main switch for 10S to restore factory Settings; S5 no . |