Tineco Support: FAQs for FLOOR ONE S6

Does it pick up large debris like cereals, dog food, etc? "

The Floor One is designed to pick up debris like cereal and wash the floor simultaneously on hard floor surfaces.

The charging storage seat has been connected to the socket, the machine is taken away, people accidentally touch the contact plate will there be electric shock risk?

No.

Can I use the Floor One to clean carpet? "

No.

When the machine is fully charged, how long does it take to run out of power if left unused? Is it possible to turn on normally after recharging after no power?

2 years.

Is it ok to leave the unit plugged into the charger after it is fully charged?

Yes, you can leave the Floor One plugged in as the Floor One will stop charging once fully charged.

Can dust be removed in suction mode?

It is not recommended to use the suction mode for the ground with suction liquid .

Does the brush scratch surfaces or dull floors?

No, it doesn't. The brush works great on hard floors causing any damage to it. It is also recommended to test an area of a sensitive surface before using any accessories on it.

S6 suction mode is always suction, will cause damage to the motor

No.

How do I charge the battery pack?

Put the machine back to the tray and plug in the charger then it will start charging and stop automatically once finished.

When do you need to switch to Max mode?

The water and suction reach the maximum value in the strong mode, and the high-grade mode can be directly switched to cleaning when there are stubborn stains on the surface that are difficult to clean.

What are the functions included in APP?

Our APP includes the status of the Floor One such as power level, dirtiness level, battery level. The APP can also show you a performance report of your cleaning. Customer Service is able to be contacted through the APP.

What is the difference between S6 LED screen and S6 LCD screen？

LED screen displays the current product status through ICONS, such as bucket cleaning detection, sewage bucket detection, battery pack power detection, while LCD screen displays more product status through dynamic video, and can teach users to use and maintain products more clearly and intuitively through LCD dynamic screen.

Is the filter replaceable and can it be washed?

The filter can be washed and cleaned. Please be sure to thoroughly dry the filter before placing it back in the Floor One. Extra filters are also available on the Tineco website.

What's the difference between S6 and S6 pro ？

S6 and S6 Pro difference is mainly the difference between the screen, S6 is LED screen,
S6 PRO is LCD screen, S6 mode is Auto mode, Max mode, Suction mode, Self-cleaning mode, and S6 Pro mode has Auto mode, Max mode, Suction mode, Ultra Mode, Self-cleaning mode.

How do I know when the Dirty Water Tank (DWT) needs to be cleaned?

You may find the air channel blocked indicator light blinking. A voice prompt can remind you to dump the DWT, or check for any blockages in the air channel. The Floor One automatically stops operating once the DWT is full.

Can S6 and S6 Pro carry out corner cleaning？

Of course, in this S6 series of products, we pay attention to optimize the structure of the brush, which can clean some corners in the family environment.

How do I know when the Clean Water Tank (CWT) needs to be refilled?

You may find the CWT empty indicator light blinking and a voice prompt reminding you to refill it.

For some pet families, can this washing machine solve the problem of pet smell ?

Of course, our product can easily clean pet residual dirt. Our product is also equipped with standard solution, which can easily eliminate the smell of pet residual dirt.

How do I know when the brush roller is blocked?

You may find the brush roller blockage indicator light blinking and a voice prompt reminding you to take out the roller to clean it. Please check the air channel if there are any blockages while the roller is out of the brush roll holder.

How to switch the 4 modes of S6 PRO

The default startup mode is Auto mode. In this mode, press the "Mode Switch" button to switch to the other three modes. You can switch to another mode as required.

How do I know when the dirty indicator light is mulfunctioning?

You may find that the dirty indicator light is blinking and you need to clean the air channel opening located underneath the DWT when it is removed.

Can the machine be restored to factory Settings?

Yes, S6 Pro long press wifi connection button for 10S, voice broadcast, long press main switch for 10S to restore factory Settings.