iFloor

The product weighs about 10 lbs.

We recommend cleaning the brushroll after each use.

The Ifloor series can be used on non-carpeted floor such as vinyl, tile, and sealed wood floors.

The warranty lasts 2 years.

We would not recommend using bleach in this machine as it could damage the machine.

We do not advise to use it as dry vacuum, which could cause damage to the brush roller. Ideally you would want to use the appliance with solution and water to ensure an ideal cleaning result.

The unique brush roll can help to remove animal hair and suck it into the Dirty Water Tank.

The product weighs about 10 lbs.

It is not recommended to use a third party cleaning solution because the floor washer is designed to be used with the Tineco Cleaning Solution to optimize the amount of bubbles that are produced with cleaning solutions. Third party solutions can cause an over abundance of bubbles when cleaning that could fill up the Dirty Water Tank within minutes of use.

No, the cleaning solution does not have an odor, but it can deodorize the area you are cleaning.

The warranty lasts 2 years.

We recommend cleaning the brushroll after each use.

The Tineco iFloor series uses 100-240V in its charger. We do not recommend using a different charger as that may not be compatible with the battery.

The unique brush roll can help to remove animal hair and suck it into the Dirty Water Tank.

Using the cap of the solution bottle, fill one cap worth of solution and pour into the Clean Water Tank. Fill up the Clean Water Tank with clean water up to the Max line.

No, the cleaning solution does not have an odor, but it can deodorize the area you are cleaning.

The temperature can be between 41°F ~ 140°F （5°C ~ 60°C). Typically normal tap water is fine to use for cleaning. Please do not use hot water as this can cause internal damage to the pipes in the Floor One.

The spot button enables stronger spray（trigger pulled） to help remove tough spots and stains.

iFloor 3 is updated version of hard floor washer based on the iFloor model. It has about 3.7 times more suction power and 100% higher brush roller power compared to the iFloor so it can achieve better cleaning results.

The Tineco iFloor series uses 100-240V in its charger. We do not recommend using a different charger as that may not be compatible with the battery.

The Ifloor series can be used on non-carpeted floor such as vinyl, tile, and sealed wood floors.

Using the cap of the solution bottle, fill one cap worth of solution and pour into the Clean Water Tank. Fill up the Clean Water Tank with clean water up to the Max line.

The Ifloor / IFLOOR 3 can be used without water for dry vacuuming. Ideally you would want to use the Ifloor 3 with solution and water to automatically adjust solution and clean water flow to ensure an ideal cleaning result.

The temperature can be between 41°F ~ 140°F （5°C ~ 60°C). Typically normal tap water is fine to use for cleaning. Please do not use hot water as this can cause internal damage to the pipes in the Floor One.

We would not recommend using bleach in this machine as it could damage the machine.

It is not recommended to use a third party cleaning solution because the floor washer is designed to be used with the Tineco Cleaning Solution to optimize the amount of bubbles that are produced with cleaning solutions. Third party solutions can cause an over abundance of bubbles when cleaning that could fill up the Dirty Water Tank within minutes of use.

iFloor 2 is updated version of hard floor washer based on the iFloor model. It has about 4 times cleaning efficiency and 100% higher brush roller power compared to the iFloor so it can achieve better cleaning results.