| The Tineco iFloor series uses 100-240V in its charger. We do not recommend using a different charger as that may not be compatible with the battery. |
| Using the cap of the solution bottle, fill one cap worth of solution and pour into the Clean Water Tank. Fill up the Clean Water Tank with clean water up to the Max line. |
| The temperature can be between 41°F ~ 140°F （5°C ~ 60°C). Typically normal tap water is fine to use for cleaning. Please do not use hot water as this can cause internal damage to the pipes in the appliance. |
| iFloor 2 is updated version of hard floor washer based on the iFloor model. It has about 4 times cleaning efficiency and 100% higher brush roller power compared to the iFloor so it can achieve better cleaning results. |
| The Ifloor series can be used on non-carpeted floor such as vinyl, tile, and sealed wood floors. |
| We would not recommend using bleach in this machine as it could damage the machine. |
| We do not advise to use as dry vacuum which would damage the brush roller. Ideally you should use the Ifloor 2 with solution and water to ensure an ideal cleaning result. |
| The product weighs about 10 lbs. |
| It is not recommended to use a third party cleaning solution because the floor washer is designed to be used with the Tineco Cleaning Solution to optimize the amount of bubbles that are produced with cleaning solutions. Third party solutions can cause an over abundance of bubbles when cleaning that could fill up the Dirty Water Tank within minutes of use. |
| The warranty lasts 2 years. |
| We advise to clean the brushroll after each use. |
| The unique brush roll can help to remove animal hair and suck it into the Dirty Water Tank. |
| Please place the appliance on the storage tray and make it in charge. Press and hold the switch button for 3s and it will begin the self-cleaning process. And please empty and clean the DWT after self-cleaning cycle. |
| No, the cleaning solution does not have an odor, but it can deodorize the area you are cleaning. |
| The spot button enables stronger spray（trigger pulled） to help remove tough spots and stains. |
